PassLeader has collected the frequent-tested knowledge into our NSE6_SDW_AD-7.6 practice materials for your reference according to our experts' years of diligent work. So our NSE6_SDW_AD-7.6 exam materials are triumph of their endeavor. By resorting to our NSE6_SDW_AD-7.6 practice materials, we can absolutely reap more than you have imagined before. We have clear data collected from customers who chose our NSE6_SDW_AD-7.6 training engine, the passing rate is 98-100 percent. So your chance of getting success will be increased greatly by our NSE6_SDW_AD-7.6 exam questions.

The software version of our NSE6_SDW_AD-7.6 study engine is designed to simulate a real exam situation. You can install it to as many computers as you need as long as the computer is in Windows system. And our software of the NSE6_SDW_AD-7.6 training material also allows different users to study at the same time. It's economical for a company to buy it for its staff. Friends or workmates can also buy and learn with our NSE6_SDW_AD-7.6 Practice Guide together.

>> Exam NSE6_SDW_AD-7.6 Pass4sure <<

Dumps NSE6_SDW_AD-7.6 Cost | NSE6_SDW_AD-7.6 Latest Test Fee

We have a team of experts curating the real NSE6_SDW_AD-7.6 questions and answers for the end users. We are always working on updating the latest NSE6_SDW_AD-7.6 questions and providing the correct NSE6_SDW_AD-7.6 answers to all of our users. We provide free updates for one year from the date of purchase. You can benefit from the updates NSE6_SDW_AD-7.6 Preparation material, and you will be able to pass the NSE6_SDW_AD-7.6 exam in the first attempt.

Fortinet NSE 6 - SD-WAN 7.6 Enterprise Administrator Sample Questions (Q41-Q46):

NEW QUESTION # 41
(Refer to the exhibit. You noticed that one SD-WAN member went down and you immediately collected the session output shown in the exhibit. What can you conclude from this output? Choose one answer.)

A. FortiGate already reevaluated this session.
B. FortiGate cannot reevaluate the session.
C. FortiGate didn't receive any traffic related to this session after the interface went down.
D. FortiGate flushed the gateway for the session.

Answer: A

NEW QUESTION # 42
(Refer to the exhibits.

The SD-WAN zones and members configuration of two branch devices are shown. The two branch devices are part of the same hub-and-spoke topology and connect to the same hub. The devices are configured to allow Auto-Discovery VPN (ADVPN). The configuration on the hub allows the initial communication between the two spokes.
When traffic flows require it, between which interfaces can the devices establish shortcuts? Choose one answer.)

A. Between T3 on Branch-A and TC on Branch-B
B. Any interface in the overlay zones
C. Between T2 on Branch-A and TA on Branch-B
D. Interface connected to HUB only

Answer: C

Explanation:
From the exhibit, both branches have an SD-WAN zone named overlay with set advpn-select enable, and each SD-WAN member in that zone is assigned a transport-group value.
Branch-A members:
* T1 # transport-group 1
* T2 # transport-group 1
* T3 # transport-group 2
Branch-B members:
* TA # transport-group 1
* TB # transport-group 2
* TC # transport-group 3
In FCSS SD-WAN 7.6 ADVPN design, transport-group is used to constrain which underlays are allowed to form ADVPN shortcuts with each other. A spoke can establish an ADVPN shortcut only between interfaces that belong to the same transport-group on both sides. This prevents building shortcuts across dissimilar transports.
Evaluating the options:
* Option D (T2 on Branch-A with transport-group 1 and TA on Branch-B with transport-group 1) is a valid shortcut pairing.
* Option C is not valid because T3 is transport-group 2 while TC is transport-group 3, so they are not permitted to form a shortcut.
* Option A is incorrect because not all overlay-zone interfaces are eligible; eligibility is restricted by transport-group matching.
* Option B is incorrect because ADVPN shortcuts are spoke-to-spoke tunnels (facilitated by the hub), not limited to "interfaces connected to hub only." Therefore, the valid shortcut pairing listed is between T2 on Branch-A and TA on Branch-B, which corresponds to Option D.

NEW QUESTION # 43
You have a FortiGate configuration with three user-defined SD-WAN zones and two members in each of these zones. One SD-WAN member is no longer in use in health-check and SD-WAN rules. You want to delete it.
What happens if you delete the SD-WAN member from the FortiGate GUI?

A. FortiGate accepts the deletion and places the member in the default SD-WAN zone.
B. FodiGate accepts the deletion and removes routes as required.
C. FortiGate displays an error message. SD-WAN zones must contain at least two members
D. FortiGate displays an error message. You must use the CLI to delete an SD-WAN member.

Answer: B

NEW QUESTION # 44
(Refer to the exhibit.

You configure SD-WAN on a standalone FortiGate device.
You want to create an SD-WAN rule that steers traffic related to Facebook and LinkedIn through the less costly internet link.
What must you do to set Facebook and LinkedIn applications as destinations from the GUI? Choose one answer.)

A. Install a license to allow applications as destinations of SD-WAN rules.
B. Enable the visibility of the applications field as destinations of the SD-WAN rule.
C. You cannot configure applications as destinations of an SD-WAN rule on a standalone FortiGate device.
D. In the Internet service field, select Facebook and LinkedIn.

Answer: D

Explanation:
In FortiOS 7.6, SD-WAN rules can steer traffic based on Internet Services, which represent predefined application and service signatures maintained by FortiGuard. Common applications such as Facebook and LinkedIn are included in the Internet Service database.
According to the FCSS SD-WAN 7.6 curriculum, when configuring an SD-WAN rule from the GUI on a standalone FortiGate device, applications are selected as destinations using the Internet service field, not by enabling a separate application destination field. The exhibit highlights the Internet service option under the Destination section, which is the correct method to match traffic for specific applications.
Option A is incorrect because there is no GUI option to enable application visibility as destinations for SD- WAN rules. Application matching is already abstracted through Internet Services.
Option C is incorrect because standalone FortiGate devices fully support application-based steering using Internet Services in SD-WAN rules.
Option D is incorrect because no additional license is required to use Internet Services in SD-WAN rules.
This functionality is included in FortiOS and relies on the built-in FortiGuard Internet Service database.
Therefore, to steer Facebook and LinkedIn traffic through a specific WAN link, you must select Facebook and LinkedIn in the Internet service field, which corresponds to option B.

NEW QUESTION # 45
You have configured the performance SLA with the probe mode as Prefer Passive.
What are two observable impacts of this configuration? (Choose two.)

A. FortiGate can offload the traffic that is subject to passive monitoring to hardware.
B. After FortiGate switches to active mode, the SLA performance rule falls back to passive monitoring after 3 minutes.
C. During passive monitoring, the SLA performance rule cannot detect dead members.
D. FortiGate passively monitors the member if TCP traffic is passing through the member.
E. FortiGate passively monitors the member if ICMP traffic is passing through the member.

Answer: C,D

Explanation:
In FortiOS 7.6, when a Performance SLA probe mode is set to Prefer Passive, FortiGate attempts to measure link performance using passive monitoring first, based on real user traffic. Only when passive monitoring is not possible does FortiGate temporarily fall back to active probing.
With Prefer Passive, FortiGate passively monitors TCP traffic flowing through the SD-WAN member to calculate SLA metrics such as latency, jitter, and packet loss. This behavior directly matches option A.
During passive monitoring, FortiGate relies on observed traffic to infer link health. Because no synthetic probes are sent, a completely dead link (with no traffic passing) cannot be detected by the SLA during passive mode. As a result, dead members may not be immediately detected, which makes option D correct.
Option B is incorrect because there is no fixed 3-minute timer defined in FortiOS 7.6 that forces a return from active probing back to passive monitoring.
Option C is incorrect because passive SLA monitoring is based on TCP traffic, not ICMP traffic. ICMP is used for active probing, not passive monitoring.
Option E is incorrect because traffic subject to passive SLA monitoring cannot be offloaded to hardware.
Passive SLA measurement requires software inspection of packets, which prevents NPU offloading.
Therefore, the two correct observable impacts of configuring the probe mode as Prefer Passive are A and D.

NEW QUESTION # 46
......

Many clients may worry that if they buy our product they will fail in the exam but we guarantee to you that our NSE6_SDW_AD-7.6 study questions are of high quality and can help you pass the exam easily and successfully. Our product boosts 99% passing rate and high hit rate so you needn’t worry that you can’t pass the exam. Our NSE6_SDW_AD-7.6 exam torrent is compiled by experts and approved by experienced professionals and updated according to the development situation in the theory and the practice. Our Fortinet NSE 6 - SD-WAN 7.6 Enterprise Administrator guide torrent can simulate the exam and boosts the timing function. The language is easy to be understood and makes the learners have no learning obstacles. So our NSE6_SDW_AD-7.6 Exam Torrent can help you pass the exam with high possibility.

Dumps NSE6_SDW_AD-7.6 Cost: https://www.passleader.top/Fortinet/NSE6_SDW_AD-7.6-exam-braindumps.html

So if you choose our company, you will get a good experience of Fortinet Dumps NSE6_SDW_AD-7.6 Cost Dumps NSE6_SDW_AD-7.6 Cost - Fortinet NSE 6 - SD-WAN 7.6 Enterprise Administrator practice test training and surprise you cannot imagine, Fortinet Exam NSE6_SDW_AD-7.6 Pass4sure Customer first is always the principle we should follow, As is known to us, the high pass rate is a reflection of the high quality of NSE6_SDW_AD-7.6 study torrent, Fortinet Exam NSE6_SDW_AD-7.6 Pass4sure You can browser our official websites.

What else must be done before the workstation Dumps NSE6_SDW_AD-7.6 Cost can access the network resources, Line Usage and Traffic Pattern Considerations, So if you choose our company, you will get a good experience NSE6_SDW_AD-7.6 of Fortinet Fortinet NSE 6 - SD-WAN 7.6 Enterprise Administrator practice test training and surprise you cannot imagine.

PassLeader: The Ideal Solution for Fortinet NSE6_SDW_AD-7.6 Exam Preparation

Customer first is always the principle we should follow, As is known to us, the high pass rate is a reflection of the high quality of NSE6_SDW_AD-7.6 study torrent, You can browser our official websites.

You can save this frustration and loss of time and exam fees, by using PassLeader Fortinet NSE6_SDW_AD-7.6 exam preparation material.